Pneumatic Wire And Cable Specimen Slicer / Paint Finish Pneumatic Dumbbell Cutter
1. Application
ZY6012A pneumatic sample slicer is used for rubber factory and scientific research unit to punch the standard rubber test piece before the tensile test. For similar materials, the machine can also be die cut.
2. Main Technical Parameters
This machine is used to die-cut rubber, plastic, leather and other special materials into various standard test pieces for testing. It can also be used as a small punch.
(1) The maximum stroke: 100mm
(2) Workbench specifications: 300mm*300mm
(3) Effective area: 300mm*300mm
(4) The use of air pressure: 0 - 0.6Mpa
3. The structure is briefly described
The punching machine is mainly composed of: cylinder, vacuum gauge, base, yoke and platform.
4. Method Of Use
(1) Put a piece of cardboard on the platform of the base;
(2) placing the sample blank on the plane of the cardboard;
(3) Place the cutter on the specimen on the workbench so that the cutting edge plane is parallel to the platform of the base;
(4) Press the cutting knife to punch it into a standard sample.
5. Matters Needing Attention And Maintenance
(1) The plane of the punching cutting edge should be parallel to the plane of the table. When cutting, the cutting edge should not be in contact with the plane of the table, so as not to damage the cutting edge.
(2) After use, the punching cutter should be coated with anti-rust oil to prevent corrosion.
(3) Apply dust cover after use to prevent oil and dust from entering.
FAQ
Q: Are you trading company or manufacturer ?
A: We are a manufacturer.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? Is it free or extra ?
A: No, we don't provide the samples for testing.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shipment.
If you have another question, please feel free to contact us.
Q: What is your terms of payment ?
A: The warranty for the equipment is 1 year. Definitely, all equipment are tested well and runs well by testing our customer's sample before shipment. Please contact us if the equipment doesn't work well after being shipped to your company. We will guide you how to fix it. The spare parts or components will be sent if necessary. The charges will be occurred if it is caused by customer's misoperation.
Product Tags:
|
|
Pneumatic Wire And Cable Specimen Slicer / Paint Finish Pneumatic Dumbbell Cutter Images
|
